Remediation Products
Professional equipment and materials for reducing radon levels in buildings. From active sub-slab depressurization to water treatment systems, these products form the foundation of effective radon mitigation.
Mitigation Systems
Complete active sub-slab depressurization (SSD/ASD) and sub-membrane depressurization (SMD) systems achieving 80–99% radon reduction. Includes soil gas collection networks, suction sumps, and radon extraction systems for existing buildings. The most effective and widely used radon reduction method, recommended by EPA and international building codes.
Fans & Extraction Equipment
In-line centrifugal fans (RadonAway, Fantech), high-pressure EC turbines (Corroventa), radon-rated blowers, and extraction equipment. Fan accessories including silencers and vibration isolators. Essential components for active soil depressurization and ventilation systems.
Ventilation Equipment
Mechanical ventilation systems for dilution and pressure control. Heat-recovery ventilation (MVHR/HRV/ERV), single-flow ventilation, positive input ventilation (PIV), crawlspace ventilation fans, and balanced ventilation systems. Effective as complementary measures or standalone solutions at moderate radon levels (300–600 Bq/m³), with reduction factors of 2–4 depending on system type and building airtightness.
Sealing Materials & Radon Barriers
Radon barrier membranes certified by diffusion coefficient per ISO/TS 11665-13. Includes bituminous membranes (SBS/APP), HDPE/LDPE polyethylene membranes, liquid-applied gas barriers, projected polyurethane systems, crack and joint sealants, and pipe penetration seals. Essential in new construction and effective when combined with active depressurization, though not recommended as standalone solution.
Pipes, Ducts & Installation Components
PVC/ABS radon vent pipes, perforated collection pipes, pipe fittings and manifolds, backdraft dampers, roof and wall discharge terminals, mounting brackets and condensate accessories. Components that connect soil gas collection zones with extraction fans and exterior discharge points.
Water Treatment Systems
Point-of-entry systems for radon removal from well water. Aeration systems (spray, packed tower, bubble) achieving up to 99.9% removal—the EPA-recommended technology. Granular activated carbon (GAC) filters for lower concentrations (50–99% removal). Off-gas ventilation and discharge equipment. Required when well water exceeds 100 Bq/l WHO/EU threshold; typical installation cost $3,000–5,000.
Monitoring & Diagnostic Equipment
Continuous radon monitors, short-term and long-term test kits, differential pressure monitors, U-tube manometers, airflow and pressure measurement instruments, and system performance alarms. Essential tools for system design, post-mitigation verification, and ongoing performance monitoring.
Replacement Parts & Accessories
Replacement fans and motors, fan housings and seals, electrical controls and switches, alarm modules, vibration dampers, and maintenance and installation kits. Critical components for repairing and maintaining installed radon mitigation systems.
